Snapbridge

  • Android
  • iOS

If a notification appears at the top of the display indicating that new firmware is available, you can use SnapBridge to download the update and transfer it to the camera as described below (for information on cameras that support this feature, see here).

Before You Begin

Before proceeding:

  • insert a memory card in the camera,
  • turn the camera on,
  • check that the camera battery level is at least 80%, and
  • confirm that the camera and smart device are paired and connected via Bluetooth.

SnapBridgeからのアップロードに限り、サムネイル画像のアップロードは、枚数・容量ともに無制限。JPEG元画像は20GBの制限適用となります。また、ご利用にあたりましては、Nikon IDの登録が必要です。. Nikon’s SnapBridge app for iOS and Android is the fastest, easiest way to get your photos out of your camera and into the world using a compatible smart device. It’s also an exciting new way to take pictures with a Bluetooth/Wi-Fi ®.

  • SnapBridge for PC is an Android application for Nikon DSLR and Digital Camera users. By using this app you can easily connect Nikon cameras with smartphones via the internet. Moreover, you can view all pictures of the Nikon camera on your Android device without any hassle.
  • SnapBridge is an app by Nikon which can be used to share your videos and photos across to various devices by syncing them. Download Now After you install the app and click pictures or record videos, they will immediately be sent to your phone and computer as long as they are within a good range.
  • SnapBridge app receives notification when new camera firmware is available. Helps you keep your camera up to date with the latest features. Note:. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. And any use of such marks by Nikon Corporation is under license. Apple, Apple logos, iPhone ®, iPod touch ®, iPad ® and App Store ® are trademarks.

  1. Tap the firmware update notice at the top of the display.

  2. Read the update instructions and tap Next.

    Viewing Update Contents

    To open your web browser to the Nikon Download Center page detailing the contents of the update, check that the smart device is connected to the Internet and tap Details.

  3. Review the license agreement. To accept the terms of the agreement and proceed to the next step, tap Accept and download.

  4. Tap Download to start the download. A progress bar will be displayed while download is in progress.

  5. When download is complete, you will be prompted to switch to Wi‑Fi. Tap OK to switch to Wi‑Fi and transfer the update to the camera. The update will be deleted from the smart device once transfer is complete.

  6. Tap OK to end the Wi‑Fi connection and return to the previous tab when transfer is complete.

  7. The camera will display a confirmation dialog. Follow the on-screen instructions to complete the update.

Interrupting Download or Transfer

  • To interrupt download or transfer, tap and then tap OK when prompted.

  • To restart download or transfer, tap Go to display the firmware update dialog and then tap the Resume button under the progress bar. The suspended process will resume from 0%.

  1. Tap the firmware update notice at the top of the display.

  2. Read the update instructions and tap Next.

    Viewing Update Contents

    To open your web browser to the Nikon Download Center page detailing the contents of the update, check that the smart device is connected to the Internet and tap Details.

  3. Review the license agreement. To accept the terms of the agreement and proceed to the next step, tap Accept and download.

  4. Tap Download to start the download. A progress bar will be displayed while download is in progress.

  5. When download is complete, you will be prompted to switch to Wi‑Fi. Tap Join to switch to Wi‑Fi and transfer the update to the camera. The update will be deleted from the smart device once transfer is complete.

  6. Tap OK to end the Wi‑Fi connection and return to the previous tab when transfer is complete.

  7. The camera will display a confirmation dialog. Follow the on-screen instructions to complete the update.

Snapbridge

Interrupting Download or Transfer

  • To interrupt download or transfer, tap and then tap OK when prompted.

  • To restart download or transfer, tap Go to display the firmware update dialog and then tap the Resume button under the progress bar. The suspended process will resume from 0%.

This section describes how to use the SnapBridge app for wireless connections between your camera and smart device. Use the latest version of the SnapBridge app. The dialogs and messages displayed by the camera and smart device may differ from those shown here, and operations may differ depending on the OS, camera firmware, and version of SnapBridge used. The instructions that follow refer to version 2.5 of the SnapBridge app.

Snapbridge App Not Working

What SnapBridge Can Do for You

Use the SnapBridge app to:

  • Download pictures as they are taken or select earlier photos for download
  • Take pictures remotely using the controls in the SnapBridge app; the pictures can be downloaded to the smart device as they are taken (before taking pictures remotely, mount the camera on a tripod or take other steps to secure it in place)
  • Upload smart device location data to the camera
  • Synchronize the camera clock to the time reported by the smart device
  • Imprint pictures with comments, the time of recording, and other information as they are taken

More on SnapBridge

SnapBridge users are referred to the app’s online help, which can be viewed by selecting Help in the app menu after connecting.

Snapbridge app

Preparing for Pairing

Snapbridge

Before connecting, ready your smart device by installing the SnapBridge app and enabling Bluetooth.

  1. Search for “snapbridge” on the Apple App Store® (iOS) or Google Play™ (Android™) and install the SnapBridge app.

    Information on supported operating systems is available from the download site. This camera is not compatible with the SnapBridge 360/170 app.

  2. Enable Bluetooth on the smart device.

    For more information, see the documentation for the smart device.

Connecting to the Camera

Connect to the camera using the SnapBridge app, not the Settings app on your device.

Download

Security

Although one of the benefits of this product is that it allows others to freely connect for the wireless exchange of data anywhere within its range, the following may occur if security is not enabled:

  • Data theft: Malicious third-parties may intercept wireless transmissions to steal user IDs, passwords, and other personal information.
  • Unauthorized access: Unauthorized users may gain access to the network and alter data or perform other malicious actions. Note that due to the design of wireless networks, specialized attacks may allow unauthorized access even when security is enabled.

Android Devices

Follow the steps below to pair the camera with Android devices (for information on iOS devices, see “iOS Devices”, 0iOS Devices). Before pairing, confirm that there is space available on the camera memory card. To prevent unexpected interruptions, you should also check that the camera battery is fully charged.

  1. Camera: Highlight Connect to smart device in the setup menu and press 2.

    After confirming that camera displays the app and camera name, ready the smart device.

  2. Smart device: Launch SnapBridge on the smart device and tap Connect to camera.

    Pairing After Launch

    If you tapped Skip at the top right corner of the welcome dialog to skip pairing when launching SnapBridge for the first time, tap Connect to camera in the tab and proceed to Step 3.

    Launching SnapBridge Early

    If you launched SnapBridge before being prompted by the camera, SnapBridge will direct you to choose a camera type in Step 2. Tapping the desired camera type displays a dialog instructing you to display the launch prompt on the camera; display the launch prompt and proceed to Step 3.

  3. Camera Name Not Displayed

    SnapBridge may not show the camera name if launched before the camera displays the launch prompt (Step 1). Exit SnapBridge and confirm that it is not running in the background (the procedure varies with the smart device; see the documentation provided with your device for details) before tapping the SnapBridge icon to launch SnapBridge again.

  4. Camera/smart device: Confirm that the camera and smart device display the same authentication code (the code is circled in the illustrations below).

  5. Camera/smart device: Initiate pairing.

    • Camera: Press J.
    • Smart device: Tap PAIR (the button circled in the illustration below, which may be labelled differently in different versions of the operation system).

    Pairing Error

    If you wait too long between pressing the button on the camera and tapping the button in SnapBridge, pairing will fail and an error will be displayed.

    • Camera: Press J and return to Step 1.
    • Smart device: Tap OK and return to Step 2.

    Pairing for the First Time

    After completing pairing for the first time using the SnapBridge app, you will be prompted to choose auto link (auto upload and auto clock and location synchronization) options. This prompt will not appear again, but auto link settings can be accessed at any time using Auto link in the tab.

  6. Camera/smart device: Follow the on-screen instructions.

    Camera: Press J. When pairing is complete, the camera will display a message stating the camera and smart device are connected. Press J and follow the on-screen instructions.

    • Smart device: Pairing is complete. Tap OK to exit to the tab.

    Pairing with Multiple Cameras

    To pair with additional cameras, tap , select Add camera, and repeat Steps 3–6. SnapBridge can be used to pair with up to 5 cameras.

iOS Devices

Follow the steps below to pair the camera with iOS devices (for information on Android devices, see “Android Devices”, 0Android Devices). Before pairing, confirm that there is space available on the camera memory card. To prevent unexpected interruptions, you should also check that the camera battery is fully charged.

  1. Camera: Highlight Connect to smart device in the setup menu and press 2.

    After confirming that camera displays the app and camera name, ready the smart device.

  2. iOS device: Launch SnapBridge on the iOS device and tap Connect to camera.

    Pairing After Launch

    If you tapped Skip at the top right corner of the welcome dialog to skip pairing when launching SnapBridge for the first time, tap Connect to camera in the tab and proceed to Step 3.

    Launching SnapBridge Early

    If you launched SnapBridge before being prompted by the camera, SnapBridge will direct you to choose a camera type in Step 2. Tapping the desired camera type displays a dialog instructing you to display the launch prompt on the camera; display the launch prompt and proceed to Step 3.

  3. Camera Name Not Displayed

    SnapBridge may not show the camera name if launched before the camera displays the launch prompt (Step 1). Exit SnapBridge and confirm that it is not running in the background (if your device is equipped with a Home button, you can do this by double-clicking the Home button and swiping up to dismiss SnapBridge; otherwise, swipe slowly up from the bottom of the screen to open the multitasking window, then tap and hold the SnapBridge preview and tap the icon). After confirming that SnapBridge is not running in the background, tap the SnapBridge icon to launch SnapBridge again.

  4. iOS device: A confirmation dialog will be displayed; read the pairing instructions carefully and tap Understood.

  5. Camera/iOS device: Initiate pairing.

    • Camera: Press J.
    • iOS device: Tap Pair (the button circled in the illustration below, which may be labelled differently in different versions of the operation system).

    Pairing Error

    If you wait too long between pressing the button on the camera and tapping the button in SnapBridge, pairing will fail and an error will be displayed.

    • Camera: Press J and return to Step 1.

    • iOS device: Exit SnapBridge and confirm that it is not running in the background (for more information, see “Camera Name Not Displayed”, 0Camera Name Not Displayed). Next, open the iOS “Settings” app and request iOS to “forget” the camera (if applicable) before returning to Step 1.

    Pairing for the First Time

    After completing pairing for the first time using the SnapBridge app, you will be prompted to choose auto link (auto upload and auto clock and location synchronization) options. This prompt will not appear again, but auto link settings can be accessed at any time using Auto link in the tab.

  6. Camera/iOS device: Follow the on-screen instructions.

    Camera: Press J. When pairing is complete, the camera will display a message stating the camera and smart device are connected. Press J and follow the on-screen instructions.

    • iOS device: Pairing is complete. Tap OK to exit to the tab.

    Pairing with Multiple Cameras

    To pair with additional cameras, tap , select Add camera, and repeat Steps 3–7. SnapBridge can be used to pair with up to 5 cameras.

    Launching SnapBridge for the First Time

    If the message ‘“SnapBridge” would like to access your photos’ is displayed when you launch the app for the first time, click OK.