Jul 11, 2007 SoftDream Oracle UnWrapper is a unwrapping software for Oracle 7/8i/9i or Oracle 10g,Oracle 11 with unwrapping package,package body, stored procedures, triggers, views and user-defined functions.type.If you wrapped your own source code of package,stored procedures, triggers, views or user-defined functions with Oracle wrap tools,but you neglectful lost it,the application can help you recovery. The Wrap Utility is upward-compatible with Oracle. So, for example, you can load files processed by the V8.1.5 Wrap Utility into a V8.1.6 Oracle database. However, the Wrap Utility is not downward-compatible with Oracle. So, for example, you cannot load files processed by the V8.1.6 Wrap Utility into a V8.1.5 Oracle database.

1Jan

Rewrap.exe Oracle

通过研究rewrap.exe的REWRAP.PRT文件，推测解密过程。 原始加密信息.

This appendix describes how to use response files to perform silent or response file installations, configure network connections, and configure or start an Oracle database. It covers the following topics:

C.1 How Response Files Work

You can automate the installation and configuration of Oracle software, either fully or partially, by specifying a response file when you start Oracle Universal Installer. Oracle Universal Installer uses the values in the response file to provide answers to some or all of the Oracle Universal Installer prompts. It includes information about the following topics:

Typically, Oracle Universal Installer runs in interactive mode, which means that it prompts you to provide information in graphical user interface (GUI) screens. When you use response files to provide this information, you run Oracle Universal Installer at a command prompt using either of the following modes:

• Silent mode: Oracle Universal Installer does not display any screens. Instead it displays progress information in the command window where you started it. To use silent mode, you run setup.exe with the -silent parameter and include a response file, which contains responses to the Oracle Universal Installer prompts.

• Response File mode: During a response file mode installation, Oracle Universal Installer displays all the screens, screens for which you specify information in the response file and also screens for which you did not specify the required information in the response file. The advantage is that you can validate the values in the screens for which you have provided the information in the response file and continue with the installation. To use response file mode, run setup.exe without the -silent parameter, but include the response file or any other parameters that apply.

You define the settings for a silent or response file installation by entering values for the variables listed in the response file. For instance, to specify the Oracle home, you would supply the appropriate value for the ORACLE_HOME variable, as in the following example:

Another way of specifying the response file variable settings is to pass them as command-line arguments when you run Oracle Universal Installer. For example:

This method supports only the Oracle Home User passwords.

See Also:

• My Oracle Support website for more information about response files:

C.1.1 Reasons for Using Silent Mode or Response File Mode

Table C-1describes several reasons why you might want to run Oracle Universal Installer in silent mode or response file mode.

Table C-1 Reasons for Using Silent Mode or Response File Mode

Mode	Uses
Silent	Use silent mode to: Complete an unattended installation Complete several similar installations on multiple systems without user interaction Oracle Universal Installer displays progress information in the window that you used to start it, but it does not display the Oracle Universal Installer screens.
Response File	Use response file mode to complete similar Oracle software installations on multiple systems, providing default answers to some, but not all, of Oracle Universal Installer prompts. In response file mode, all the installer screens are displayed, but defaults for the fields in these screens are provided by the response file. You have to provide information for the fields in screens where you have not provided values in the response file.

C.1.2 General Procedure for Using Response Files

You follow these general steps to install Oracle Database using response files:

1. If you plan to use Oracle Automatic Storage Management and configure new disks, then you must perform the following steps:

   1. Create partitions for DAS or SAN disks.

   2. Manually configure the disks using the asmtoolg or asmtool utility.

2. Customize or create a response file for the installation settings that you need.

   You can create the response file by using one of the following methods:

   • Modify one of the sample response files that is provided with the installation.

   • Run Oracle Universal Installer at a command prompt and save the inputs by selecting the Save Response File option.

   'Preparing a Response File' explains how to customize or create the response file.

3. Run Oracle Universal Installer from a command prompt, specifying the response file, using either silent or response file mode.

   Note:

   Windows requires Administrator privileges at the command prompt.

   'Running Oracle Universal Installer Using the Response File' explains how to run Oracle Universal Installer with a response file.

C.2 Preparing a Response File

This section describes the methods that you can use to prepare a response file for use during silent-mode or response file-mode installations:

C.2.1 Editing a Response File Template

Oracle provides response file templates for each product and installation type, and for each configuration tool. These files are located in the ORACLE_BASEORACLE_HOMEassistants directory, and the databaseresponse directory on the Oracle Database installation media.

Note:

If you copied the software to a hard disk, the response files are located in the stage_areadatabaseresponse directory.

Table C-2 lists the available sample response files:

Table C-2 Response Files

Response File Name	Description
db_install.rsp	Silent installation of Oracle Database 12c
grid_install.rsp	Silent installation of Oracle Grid Infrastructure
dbca.rsp	Silent installation of Database Configuration Assistant
netca.rsp	Silent installation of Oracle Net Configuration Assistant

Caution:

When you modify a response file template and save a file for use, the response file may contain plain text passwords. Ownership of the response file should be given to the Oracle software installation owner only. Oracle strongly recommends that database administrators or other administrators delete or secure response files when they are not in use.

To copy and modify a response file:

1. Copy the appropriate response files from the databaseresponse directory on the Oracle Database media to your hard drive.

2. Modify the response files with a text file editor.

   See Also:

   Oracle Universal Installer and OPatch User's Guide for Windows and UNIX

3. Run the response file by following the instructions in the 'Running Oracle Universal Installer Using the Response File' section.

C.2.2 Saving a Response File

You can use the Oracle Universal Installer in interactive mode to save a response file, which you can edit and then use to complete silent mode or response file mode installations.

Starting with Oracle Database 11g Release 2 (11.2), you can save all the installation steps into a response file during installation by clicking Save Response File on the Summary page. You can use the generated response file for a silent installation later.

When you save the response file, you can either complete the installation, or you can exit from Oracle Universal Installer on the Summary page, before it starts to copy the software to the system.

Note:

Oracle Universal Installer does not save passwords in the response file.

To save a response file:

1. Ensure that the computer on which you are creating the response file has met the requirements described in Chapter 3.

   When you run Oracle Universal Installer to save a response file, it checks the system to verify that it meets the requirements to install the software. For this reason, Oracle recommends that you complete all of the required preinstallation tasks and save the response file while completing an installation.

2. At the command prompt, use the cd command to change to the directory that contains the Oracle Universal Installer setup.exe executable.

   Note:

   Windows requires Administrator privileges at the command prompt.

   On the installation DVD, setup.exe is located in the database directory. Alternatively, navigate to the directory where you downloaded or copied the installation files.

3. Run setup.exe.

4. After Oracle Universal Installer starts, enter the installation settings, to save the response file.

5. When the installer displays the Summary screen, perform the following:

   1. Click Save Response File and specify a file name and location for the response file. Then, click Save to save the values to the file.

   2. Click Finish to continue with the installation.

      Click Cancel if you do not want to continue with the installation. The installation stops, but the saved response file is retained.

6. Before you use the saved response file on another system, edit the file and make any required changes.

   Use the instructions in the file as a guide when editing it.

C.3 Running Oracle Universal Installer Using the Response File

At this stage, you are ready to run Oracle Universal Installer at the command line, specifying the response file you created, to perform the installation. On Windows, you must open the command prompt with Administrator privileges. The Oracle Universal Installer executable, setup.exe, provides several options. For help information about the full set of these options, run setup.exe with the -help option, for example:

A new command window appears, with the 'Preparing to launch..' message. In a moment, the help information appears in that window.

To run Oracle Universal Installer and specify a response file:

1. Place the response file on the computer where you want to install Oracle Database.

2. At a command prompt, run Oracle Universal Installer with the appropriate response file. On Windows, you must open the command prompt with Administrator privileges. For example:

   where:

   • filename: Identifies the full path of the response file.

   • setup.exe_location: Indicates the location of setup.exe.

   • -silent: Runs Oracle Universal Installer in silent mode and suppresses the Welcome window.

   • 'variable=setting' refers to a variable within the response file that you may prefer to run at the command line rather than set in the response file. Enclose the variable and its setting in quotes.

   • -noconfig: Suppresses running the configuration assistants during installation, performing a software-only installation instead.

   • -nowait: Closes the console window when the silent installation completes.

   If you save a response file during a silent installation, then Oracle Universal Installer saves the variable values that were specified in the original source response file into the new response file.

See Also:

C.4 Running Net Configuration Assistant Using a Response File

When you run Net Configuration Assistant with a response file, you run it in silent mode. This lets you configure and start an Oracle Net listener on the system, configure naming methods, and configure Oracle Net service names. To run NetCA in silent mode, use the netca.rsp response file in the ORACLE_BASEORACLE_HOMEassistantsnetca directory, and the response directory in the databaseresponse directory on the DVD.

Note:

If you copied the software to a hard disk, the response files are located in the stage_areadatabaseresponse directory.

On Windows, you must open the command prompt with Administrator privileges.

To create a Net Configuration Assistant response file:

1. Copy the netca.rsp response file template from the response file directory to a directory on your system.

   The netca.rsp is located in the databaseresponse directory on the Oracle Database installation media.

2. Open the response file in a text editor.

3. Edit the file, following the instructions in the file.

   Net Configuration Assistant fails if you do not correctly configure the netca.rsp response file.

To run Net Configuration Assistant using the response file you just created, run Net Configuration Assistant in silent mode as follows, replacing local_dir with the directory where you placed your version of the netca.rsp response file:

For example:

Rewrap.exe Oracle Code

C.5 Running Oracle Database Configuration Assistant Using a Response File

You can run Oracle Database Configuration Assistant in silent or response file mode to configure and start an Oracle database on your system. To run Oracle Database Configuration Assistant in silent or response file mode, use the dbca.rsp response file in the ORACLE_BASEORACLE_HOMEassistantsnetca directory, and the response directory in the databaseresponse directory on the DVD.

Note:

If you copied the software to a hard disk, the response files are located in the stage_areadatabaseresponse directory.

To run Database Configuration Assistant in response file mode, you must use the -responseFile flag in combination with either the -silent or -progressOnly flag. To run Database Configuration Assistant in response file mode, you must use a graphical display and set the DISPLAY environment variable.

See Also:

On Windows, you must open the command prompt with Administrator privileges.

This section contains the following topics:

C.5.1 Silent Mode of Database Configuration Assistant

Use the -silent flag in combination with the -responseFile flag to set the mode to silent. In the silent mode, Database Configuration Assistant uses values that you specify, in the response file or as command-line options, to create a database. No window or user interface is displayed in the silent mode.

C.5.2 Progress Only Mode of Database Configuration Assistant

Use the -progressOnly flag in combination with the -responseFile flag, to set the mode to progress only. As it configures and starts the database, Database Configuration Assistant displays a window that contains status messages and a progress bar.

In this mode, Database Configuration Assistant uses values that you specify, in the response file or as command line options, to create a database.

C.5.3 Running Database Configuration Assistant in Response File Mode

To create an Oracle Database Configuration Assistant response file:

1. Copy the dbca.rsp response file template from the response file directory to a directory on your system.

   The dbca.rsp response file is located in the databaseresponse directory on the Oracle Database installation media.

2. Open the dbca.rsp response file in a text editor.

3. Edit the dbca.rsp file, following the instructions in the file.

   Oracle Database Configuration Assistant fails if you do not correctly configure the dbca.rsp response file.

To run Oracle Database Configuration Assistant using the response file you just created, run Oracle Database Configuration Assistant in silent or response file mode using the following syntax:

(Only for Xbox 360 or PC)Stats: Adds to critical chance, adds to critical damage, adds immunity to flanking. Dragon age 2 legacy story. I grant you, this is a magnificent belt–best I've seen. Released: 8th March, 2011 for any pre-orderAt the height of the Summer War all of was embroiled in fierce battles. But I'd downplay this whole Crow malarkey.The Antivan Garrote belt is an exclusive item for Dragon Age II available from the for any orders.

where:

• -silent runs Oracle Database Configuration Assistant in silent mode

• -progressOnly runs Oracle Database Configuration Assistant in response file mode

• local_dir is the full path of the directory where you copied the dbca.rsp response file template.

For example:

As an alternative to creating a database using a response file, you can run dbca at the command line by specifying all the required information as command line options. Database Configuration Assistant writes progress messages to stdout. For information about the list of options supported, enter the following command:

C.6 Postinstallation Configuration Using a Response File

Use the following sections to create and run a response file configuration after installing Oracle software.

C.6.1 About the Postinstallation Configuration File

When you run a silent or response file installation, you provide information about your servers in a response file that you otherwise provide manually during a graphical user interface installation. However, the response file does not contain passwords for user accounts that configuration assistants require after software installation is complete. The configuration assistants are started with a script called configToolAllCommands. You can run this script in response file mode by using a password response file. The script uses the passwords to run the configuration tools in succession to complete configuration.

If you keep the password file to use for clone installations, then Oracle strongly recommends that you store it in a secure location. In addition, if you must stop an installation to fix an error, you can run the configuration assistants using configToolAllCommands and a password response file.

The configToolAllCommands password response file consists of the following syntax options:

• internal_component_name is the name of the component that the configuration assistant configures

• variable_name is the name of the configuration file variable

• value is the desired value to use for configuration.

The command syntax is as follows:

internal_component_namevariable_name=value

For example:

Oracle strongly recommends that you maintain security with a password response file:

• Permissions on the response file should be set to 600.

• The owner of the response file should be the installation owner user, with the group set to the central inventory (oraInventory) group.

C.6.2 Running Postinstallation Configuration Using a Response File

To run configuration assistants with the configToolAllCommands script:

1. Create a response file using the syntax filename.properties. For example:

2. Open the file with a text editor, and cut and paste the password template, modifying as needed.

   Example C-1 Password response file for Oracle Grid Infrastructure for a standalone server

   Oracle Grid Infrastructure requires passwords for Oracle Automatic Storage Management Configuration Assistant (ASMCA), and for Intelligent Platform Management Interface Configuration Assistant (IPMICA) if you have a BMC card and you want to enable this feature. Provide the following response file,

   Example C-2 Password response file for Oracle Database

   Oracle Database configuration requires the SYS, SYSTEM, and DBSNMP passwords for use with Database Configuration Assistant (DBCA). The S_ASMSNMPPASSWORD password is necessary only if the database is using Oracle ASM for storage. Similarly, the S_PDBADMINPASSWORD password is necessary only if you create a multitenant container database (CDB) with one or more pluggable databases (PDBs). Also, if you selected to configure Oracle Enterprise Manager, then you must provide the password for the Oracle software installation owner for the S_EMADMINPASSWORD password.

   If you do not want to enable Oracle Enterprise Manager or Oracle ASM, then leave those password fields blank.

3. Secure the cfgrsp.properties file by changing permissions in Properties page. Right-click the file to open the Properties page. Select the Security tab, click the Edit button, select a group or user, then select Deny check box against Read permissions to remove read access for unwanted users.

4. Change directory to ORACLE_HOMEcfgtoollogs

5. Before running configToolAllCommands, rename it using the following command:

   copy configToolAllCommands configToolAllCommands.bat

6. Run the configuration script using the following syntax:

   configToolAllCommands.bat RESPONSE_FILE=pathname.properties

   for example:

Using the installer script and the setup command is the fastest way to get up and running with the CLI.

Warning
Oracle recommends that you avoid using string values that include confidential information.

Rewrap.exe Oracle Card

Installing the CLI

The installer script automatically installs the CLI and its dependencies, Python and virtualenv. Before running the installer, be sure you meet the Requirements.

Note
Oracle Autonomous Linux 7 and Cloud Shell have the CLI pre-installed.

MacOS, Linux, and Unix

1. Open a terminal.

2. To run the installer script, run the following command.

3. Respond to the Installation Script Prompts.

Windows

1. Open the PowerShell console using the Run as Administrator option.

2. The installer enables auto-complete by installing and running a script. To allow this script to run, you must enable the RemoteSigned execution policy.

   To configure the remote execution policy for PowerShell, run the following command.

3. To run the installer script, run the following command.

4. Respond to the Installation Script Prompts.

Installation Script Prompts

The installation script prompts you for the following information.

• If you do not have a compatible version of Python installed:
  • Windows and Linux: You are prompted to provide a location for installing the binaries and executables. The script will install Python for you.
  • MacOS: You are notified that your version of Python is incompatible. You must upgrade before you can proceed with the installation. The script will not install Python for you.
• When prompted to upgrade the CLI to the newest version, respond with Y to overwrite an existing installation.
• When prompted to update your PATH, respond with Y to be able to invoke the CLI without providing the full path to the executable. This will add oci.exe to your PATH.

Setting up the Config File

Before using the CLI, you must create a config file that contains the required credentials for working with Oracle Cloud Infrastructure. You can create this file using a setup dialog or manually using a text editor.

Rewrap.exe Oracle Training

Use the Setup Dialog

To have the CLI walk you through the first-time setup process, use the oci setup config command. The command prompts you for the information required for the config file and the API public/private keys. The setup dialog generates an API key pair and creates the config file.

For more information about how to find the required information, see:

Manual Setup

If you want to set up the API public/private keys yourself and write your own config file, see SDK and Tool Configuration.

Rewrap.exe Oracle File

Tip

Rewrap.exe Oracle Software

Use the oci setup keys command to generate a key pair to include in the config file.

Next Steps

• For details on starting a session, see Starting a CLI Session
• Getting Started with the Command Line Interface provides an end-to-end walk-through of using the CLI to launch an instance.